Easy
LCD water
timer user manual VEL
***
Please cover and fasten the transparent cover.
Otherwise
you can not waterproof and cause failure ****
The water timer can replace the function of traditional knob water
timer, easily operation with LCD display to show the state of water
timer. Extra solar and rain stop function can help you take care of your
garden better.
A.
Control pad instruction
B.
Function
1. Automatic watering by set up the time mode
2. Run once function
3. Manual open and close
4. Solar function
5. Rain stop function
6. Electricity saving function (Sleeping mode
C.
Battery Installation
Please use 2*AA alkaline battery to test this timer. Usually, the new
rechargeable battery is without any power, the batteries must be fully
charged for the first time use; otherwise, timer will not work. Please
be noted that water timer will check if the valve is off when battery
installed. (LCD will display
).
D. Solar
Function (only VEL01)
You can use this water timer to charge the rechargeable battery by the
solar panel on the timer, but solar panel must under sunshine. Usually,
the new rechargeable battery is without any power, the batteries must
be fully charged for the first time use; otherwise, timer will not
work.
E. Time
Mode Setting Operation Steps
After installed the batteries, please follow the steps to set up the
time mode and auto-run the water timer.
[Simple Periodically Watering Setting Mode]
1.Start setting the time mode while LCD display
Press the 1st key (FREQ). LCD will display , blink.
(Water timer is in setting mode.)
2. Choose the time interval of periodically watering.
Press the 1st key (FREQ) continually to choose one time
interval you like. LCD will display , blink
all the time. And the number of minute, hour or day will be changing
accordingly. There are 16 kinds of time intervals in the system which
you can choose.
Time interval: 1min. 5min. 10min. 15min. 30min. 1hour 2hour 3hour 4hour
6hour 8hour 12hour 1day 2days 3days 7days.
3.Choose the running time.
Press the 2nd key (RUN TIME) continually to choose one time
interval you like. LCD will display, blink
all the time. And the number of second, minute or hour will be changing
accordingly. There are 16 kinds of running time in the system which you
can choose.
Running time: 10sec. 20sec. 30sec. 45sec. 1min. 2min. 3min. 5min. 10min.
15min. 20min. 30min. 45min. 1hour 1.5 hour 2hours
4.Run the watering time mode.
Press the 5th key (AUTO). LCD will display
.
You can see the time counting
down automatically.
EXAMPLE: If you want the timer to water your garden 3 minutes in 12
hours.
Steps: Press the 1st key (FREQ) once to start setting the
time mode, then press the 1st key (FREQ) 12 times
to choose the time interval (Display 0 12:00 00). Press the 2nd
key (RUN TIME) 7 times to choose the watering time (Display 00:03 00).
At last, press the 5th key (AUTO) to finish the setting and
run the watering timer automatically. LCD will display and
the time will count down automatically from 0 12:00 00.
[Self-defined Periodically Watering Setting Mode]
1.Start
setting the time mode.
Please Press the 5th key (SET). LCD will display, blink.
(Water timer is in setting mode.)
2.
Self-defined the time interval of periodically watering.
01. Press the 4th key (ENTER) once to start self-defined the
day in the watering time periodically.
LCD will display,
day blink.
02. Press the 1st key (-)
or 2nd key ( + ) continually to choose the day number between
0 to 9.
03. Press the 4th key (ENTER) again to start self-defined the
hour in the watering time periodically. LCD will display,
hour blink.
04. Press the 1st key (-)
or 2nd key ( + ) continually to choose the hour number
between 0 to 23.
05.Press the 4th key (ENTER) again to start self-defined
the minute in the watering time
periodically. LCD will display,
minute blink.
06.Press the 1st key (-)
or 2nd key ( + ) continually to choose the minute number
between 0 to 59.
07.Press the 4th key (ENTER) again to start self-defined the
second in the watering time periodically. LCD will display,
second blink.
08. Press the 1st key (-)
or 2nd key ( + ) continually to choose the second number
between 0 to 59.
09. Press the 5th key (EXIT)
once to finish the setting of time interval. LCD will display, blink.
Time interval can be any time within 10days.
3.
Self-defined the running time.
01. Press the 1st key (FREQ) or 2nd key (RUN TIME)
once to start self-defined the running time.
LCD will display, blink.
02. Press the 4th key (ENTER) once to start self-defined the
hour in the watering time periodically. LCD will display,
hour blink.
03. Press the 1st key (-)
or 2nd key ( + ) continually to choose the hour number
between 0 to 99.
04.Press the 4th key (ENTER) again to start self-defined the
minute in the watering time periodically. LCD will display,
minute blink.
05. Press the 1st key (-)
or 2nd key ( + ) continually to choose the minute number
between 0 to 59.
06. Press the 4th key (ENTER) again to start self-defined the
second in the watering time periodically. LCD will display,
second blink.
07. Press the 1st key (-)
or 2nd key ( + ) continually to choose the second number
between 0 to 59.
08. Press the 5th key (EXIT) to finish the setting of running
time. LCD will display, blink.
Running time can be any time within 100hours.
4.
Run the watering time mode.
Press the 5th key (AUTO). LCD will display
.
You can see the time counting down.
EXAMPLE: If you want the timer to water your
garden 20 seconds in 2 days and 22 hours.
Steps: Press the 5th key (SET) once to start setting the time
mode, press the 4th key (ENTER) once to start self-defined
day setting. Press the 2nd key ( + ) twice (display 2 00:00
00). Press the 4th key (ENTER) again to start self-defined
hour setting, then press 2nd key ( + ) 22 times (Display 2
22:00 00). Press the 5th key (EXIT) to finish your
periodically time interval setting. Press the 1st key (FREQ)
or the 2nd key (RUN TIME) once to start setting the running
time and press the 4th key (ENTER) thrice to start
self-defined running second, then press 2nd key ( + ) 20
times (display 00:00 20). At last, press the 5th key (EXIT)
to finish the setting and press 5th key (AUTO) again to run
the watering timer automatically. LCL will display and
the time will count down from 2 22:00 00.
NOTE: THE WATER TIMER WILL AUTORUN THE LAST WATERING TIME MODE YOU
SETTED.
F.
Run Once Function
After setting the periodically time mode, you can choose run once
function by press the 3rd key (RUN ONCE) when you need. Then,
the timer will water only once according to the current timer mode. LCD
will display and
time counting down as usual.
The
timer won’t water again unless you press the 3rd key (RUN
ONCE) again to cancel the run once function.
Note: The timer will count down periodically as per timer mode during
run once function, but just watering once.
G.
Manual open and close
01. Press the 4th key (OPEN), the water valve will open, LCD
will display --:-- --.
02. Press the 4th key (CLOSE) again, the water valve will
close, LCD will display --:-- -- and disappeared.
All setting stops working now. You must press 5th key (EXIT)
back to autorun mode, LCD will display
.
H. Rain Stop Function
(only VEL01)
There are two metal slips (water collecting area) on the top. Put the
water timer outdoors, the timer will stop watering when raining until
next running time after the water collecting area is dry.
I.
Battery Low Power
If batteries are low power. LCD will display .
When is
appearing, the electricity saving function will stop and LCD will bright
all the time. Please change the batteries and set up again.
***
Please cover and fasten the transparent cover.
Otherwise
you can not waterproof and cause failure ****
|